核电厂数字化仪控系统全范围模拟机仿真方式研究及应用--控制网



核电厂数字化仪控系统全范围模拟机仿真方式研究及应用
企业:北京广利核系统工程有限公司 日期:2020-07-30
领域:DCS 点击数:302

作者:张登超(1983-),男,北京人,本科,现就职于北京广利核系统工程有限公司,主要从事核电厂全范围模拟机的研究、设计、调试等工作。

摘要:仿真方式在核电厂数字化仪控系统全范围模拟机研究、培训、设计等方面中起着重要作用。本文以阳江二期全范围模拟机为例,研究分析了逻辑控制层level1采用虚拟实物仿真方式、人机界面监控层level2采用实物仿真方式、KDS系统采用翻译仿真方式;结合现场应用情况,从精度、逼真度、稳定性、经济性、维护方面对比国内之前某核电站全范围模拟机的优缺点,得出当前采用的仿真方式易维护、成本降低约50%、逼真度达到95%,且更稳定。可为后续开发更先进DCSFSS数字化仪控系统提供重要的参考价值。

关键词:核电;全范围模拟机;FSS;仿真方式

Abstract: The simulation mode plays an important rolein the research, training and design of the full scopesimulator of the digital I & C system in nuclear powerplant. Taking Yangjiang Phase II full scope simulatoras an example, this paper analyzes the logic controllevel1 employing virtual physical simulation mode,man-machine interface monitoring level2 employingphysical simulation mode, and KDS(Diversity ActuationSystem)system employing translation simulationmode. Combined with field application situation,the advantages and disadvantages of the full scopesimulator of a nuclear power plant before in Chinawere compared from the aspects of accuracy, fidelity,stability, economy and maintenance. It is concludedthat the current simulation method is easy to maintain,the cost is reduced by about 50%, the fidelity is up to95%, and it is more stable. It can provide importantreference value for the subsequent development ofmore advanced DCSFSS digital I & C system.

Key words: Nuclear power; Full scope simulator; FSS;Simulation ways

在线预览:核电厂数字化仪控系统全范围模拟机仿真方式研究及应用

摘自《自动化博览》2020年7月刊

  • 在线反馈
1.我有以下需求:



2.详细的需求:
姓名:
单位:
电话:
邮件: